-50%
School Bus Rider Bag Tag Sublimation Blank For Discount
Original price was: $1.75.$0.88Current price is: $0.88.
21 people are viewing this right now

Guaranteed safe & secure checkout
Description
Additional Information
Questions
Description
MDF School Bus Rider Bag Tag sublimation blank for heat press
This unisub MDF sublimation blank was created solely for using with the image created by Pixel Pops which can be found HERE
*DESIGN NOT INCLUDED* MUST BE PURCHASED SEPARATELY *
** Please send Pioneer a message or email if you need help with matching this design to our blank**
Finished Size | W 3.64 H 3.5 approx 2.8mm thick
Print Size | W 3.73 H 3.59 | Print Opposite Sides
Comes with strap
✔️ Single or double sided
✔️ Gloss (clear film) or matte (blue film) finish
✔️ PNG image and template download upon order fulfillment
✔️ Backside of single sided blanks are unfinished and may have some burn marks around the edges due to the nature of being laser cut
Don t see what you are looking for? Contact us via our Facebook page or email us at pioneersupplierandcreations.com
PRESSING INSTRUCTIONS:
- Remove the clear or blue film from the substrate.
-
- Remove residue, if any, with a soft damp cloth.
-
- Place your MDF substrate onto your transfer and secure with heat tape.
-
- Press for 50-55 seconds @ 380 degrees medium pressure. (Time and temp may vary based on your heat press)
-
Blank Sublimation Unisub, Hardboard, MDF, Ready to Sublimate
This unisub MDF sublimation blank was created solely for using with the image created by Pixel Pops which can be found HERE
*DESIGN NOT INCLUDED* MUST BE PURCHASED SEPARATELY *
** Please send Pioneer a message or email if you need help with matching this design to our blank**
Finished Size | W 3.64 H 3.5 approx 2.8mm thick
Print Size | W 3.73 H 3.59 | Print Opposite Sides
Comes with strap
✔️ Single or double sided
✔️ Gloss (clear film) or matte (blue film) finish
✔️ PNG image and template download upon order fulfillment
✔️ Backside of single sided blanks are unfinished and may have some burn marks around the edges due to the nature of being laser cut
Don t see what you are looking for? Contact us via our Facebook page or email us at pioneersupplierandcreations.com
PRESSING INSTRUCTIONS:
- Remove the clear or blue film from the substrate.
-
- Remove residue, if any, with a soft damp cloth.
-
- Place your MDF substrate onto your transfer and secure with heat tape.
-
- Press for 50-55 seconds @ 380 degrees medium pressure. (Time and temp may vary based on your heat press)
-
Blank Sublimation Unisub, Hardboard, MDF, Ready to Sublimate
*DESIGN NOT INCLUDED* MUST BE PURCHASED SEPARATELY *
** Please send Pioneer a message or email if you need help with matching this design to our blank**
Finished Size | W 3.64 H 3.5 approx 2.8mm thick
Print Size | W 3.73 H 3.59 | Print Opposite Sides
Comes with strap
✔️ Single or double sided
✔️ Gloss (clear film) or matte (blue film) finish
✔️ PNG image and template download upon order fulfillment
✔️ Backside of single sided blanks are unfinished and may have some burn marks around the edges due to the nature of being laser cut
Don t see what you are looking for? Contact us via our Facebook page or email us at pioneersupplierandcreations.com
PRESSING INSTRUCTIONS:
- Remove the clear or blue film from the substrate.
-
- Remove residue, if any, with a soft damp cloth.
-
- Place your MDF substrate onto your transfer and secure with heat tape.
-
- Press for 50-55 seconds @ 380 degrees medium pressure. (Time and temp may vary based on your heat press)
-
Blank Sublimation Unisub, Hardboard, MDF, Ready to Sublimate
** Please send Pioneer a message or email if you need help with matching this design to our blank**
Finished Size | W 3.64 H 3.5 approx 2.8mm thick
Print Size | W 3.73 H 3.59 | Print Opposite Sides
Comes with strap
✔️ Single or double sided
✔️ Gloss (clear film) or matte (blue film) finish
✔️ PNG image and template download upon order fulfillment
✔️ Backside of single sided blanks are unfinished and may have some burn marks around the edges due to the nature of being laser cut
Don t see what you are looking for? Contact us via our Facebook page or email us at pioneersupplierandcreations.com
PRESSING INSTRUCTIONS:
- Remove the clear or blue film from the substrate.
-
- Remove residue, if any, with a soft damp cloth.
-
- Place your MDF substrate onto your transfer and secure with heat tape.
-
- Press for 50-55 seconds @ 380 degrees medium pressure. (Time and temp may vary based on your heat press)
-
Blank Sublimation Unisub, Hardboard, MDF, Ready to Sublimate
Finished Size | W 3.64 H 3.5 approx 2.8mm thick
Print Size | W 3.73 H 3.59 | Print Opposite Sides
Comes with strap
✔️ Single or double sided
✔️ Gloss (clear film) or matte (blue film) finish
✔️ PNG image and template download upon order fulfillment
✔️ Backside of single sided blanks are unfinished and may have some burn marks around the edges due to the nature of being laser cut
Don t see what you are looking for? Contact us via our Facebook page or email us at pioneersupplierandcreations.com
PRESSING INSTRUCTIONS:
- Remove the clear or blue film from the substrate.
-
- Remove residue, if any, with a soft damp cloth.
-
- Place your MDF substrate onto your transfer and secure with heat tape.
-
- Press for 50-55 seconds @ 380 degrees medium pressure. (Time and temp may vary based on your heat press)
-
Blank Sublimation Unisub, Hardboard, MDF, Ready to Sublimate
Print Size | W 3.73 H 3.59 | Print Opposite Sides
Comes with strap
✔️ Single or double sided
✔️ Gloss (clear film) or matte (blue film) finish
✔️ PNG image and template download upon order fulfillment
✔️ Backside of single sided blanks are unfinished and may have some burn marks around the edges due to the nature of being laser cut
Don t see what you are looking for? Contact us via our Facebook page or email us at pioneersupplierandcreations.com
PRESSING INSTRUCTIONS:
- Remove the clear or blue film from the substrate.
-
- Remove residue, if any, with a soft damp cloth.
-
- Place your MDF substrate onto your transfer and secure with heat tape.
-
- Press for 50-55 seconds @ 380 degrees medium pressure. (Time and temp may vary based on your heat press)
-
Blank Sublimation Unisub, Hardboard, MDF, Ready to Sublimate
Comes with strap
✔️ Single or double sided
✔️ Gloss (clear film) or matte (blue film) finish
✔️ PNG image and template download upon order fulfillment
✔️ Backside of single sided blanks are unfinished and may have some burn marks around the edges due to the nature of being laser cut
Don t see what you are looking for? Contact us via our Facebook page or email us at pioneersupplierandcreations.com
PRESSING INSTRUCTIONS:
- Remove the clear or blue film from the substrate.
-
- Remove residue, if any, with a soft damp cloth.
-
- Place your MDF substrate onto your transfer and secure with heat tape.
-
- Press for 50-55 seconds @ 380 degrees medium pressure. (Time and temp may vary based on your heat press)
-
Blank Sublimation Unisub, Hardboard, MDF, Ready to Sublimate
✔️ Single or double sided
✔️ Gloss (clear film) or matte (blue film) finish
✔️ PNG image and template download upon order fulfillment
✔️ Backside of single sided blanks are unfinished and may have some burn marks around the edges due to the nature of being laser cut
Don t see what you are looking for? Contact us via our Facebook page or email us at pioneersupplierandcreations.com
PRESSING INSTRUCTIONS:
- Remove the clear or blue film from the substrate.
-
- Remove residue, if any, with a soft damp cloth.
-
- Place your MDF substrate onto your transfer and secure with heat tape.
-
- Press for 50-55 seconds @ 380 degrees medium pressure. (Time and temp may vary based on your heat press)
-
Blank Sublimation Unisub, Hardboard, MDF, Ready to Sublimate
✔️ Gloss (clear film) or matte (blue film) finish
✔️ PNG image and template download upon order fulfillment
✔️ Backside of single sided blanks are unfinished and may have some burn marks around the edges due to the nature of being laser cut
Don t see what you are looking for? Contact us via our Facebook page or email us at pioneersupplierandcreations.com
PRESSING INSTRUCTIONS:
- Remove the clear or blue film from the substrate.
-
- Remove residue, if any, with a soft damp cloth.
-
- Place your MDF substrate onto your transfer and secure with heat tape.
-
- Press for 50-55 seconds @ 380 degrees medium pressure. (Time and temp may vary based on your heat press)
-
Blank Sublimation Unisub, Hardboard, MDF, Ready to Sublimate
✔️ PNG image and template download upon order fulfillment
✔️ Backside of single sided blanks are unfinished and may have some burn marks around the edges due to the nature of being laser cut
Don t see what you are looking for? Contact us via our Facebook page or email us at pioneersupplierandcreations.com
PRESSING INSTRUCTIONS:
- Remove the clear or blue film from the substrate.
-
- Remove residue, if any, with a soft damp cloth.
-
- Place your MDF substrate onto your transfer and secure with heat tape.
-
- Press for 50-55 seconds @ 380 degrees medium pressure. (Time and temp may vary based on your heat press)
-
Blank Sublimation Unisub, Hardboard, MDF, Ready to Sublimate
✔️ Backside of single sided blanks are unfinished and may have some burn marks around the edges due to the nature of being laser cut
Don t see what you are looking for? Contact us via our Facebook page or email us at pioneersupplierandcreations.com
PRESSING INSTRUCTIONS:
- Remove the clear or blue film from the substrate.
-
- Remove residue, if any, with a soft damp cloth.
-
- Place your MDF substrate onto your transfer and secure with heat tape.
-
- Press for 50-55 seconds @ 380 degrees medium pressure. (Time and temp may vary based on your heat press)
-
Blank Sublimation Unisub, Hardboard, MDF, Ready to Sublimate
Don t see what you are looking for? Contact us via our Facebook page or email us at pioneersupplierandcreations.com
Blank Sublimation Unisub, Hardboard, MDF, Ready to Sublimate
Additional Information
Finish | Gloss Single, Gloss Double, Matte Single |
---|